Навигация
ГЛАВНАЯ
FAQ
СПРАВОЧНИК
ЭНЦИКЛОПЕДИЯ
XEROX
Материалы сайта
НОВОСТИ
ПУБЛИКАЦИИ
Локальный форум
2003
2004
2005
2006
2007
Главная страница
-->
Справочник
Коды ошибок Canon NP-7161
Canon NP-7161
-->
E000
-->
The thermistor (TH1, TH2) has poor contact or an open circuit.
The fixing heater (H1) has an open circuit.
The thermal switch (TSW1) has turned on.
The triac is faulty.
The DC controller PCB is faulty.
E001
-->
The thermistor (TH1, TH2) has a short circuit.
The triac is faulty.
The DC controller PCB is faulty.
E002
-->
The thermistor (TH1, TH2) has poor contact or an open circuit.
The fixing heater (H1) has an open circuit.
The thermal switch (TSW1) has turned on.
The triac is faulty.
The DC controller PCB is faulty.
E003
-->
The thermistor (TH1, TH2) has poor contact or an open circuit.
The fixing heater (H1) has an open circuit.
The thermal switch (TSW1) has turned on.
The triac is faulty.
The DC controller PCB is faulty.
E004
-->
The triac has a short circuit.
The DC controller PCB is faulty.
E010
-->
The main motor (M1) is faulty.
The DC controller PCB is faulty.
E013
-->
The waste toner feedscrew is locked.
The waste toner feedscrew lock sensor (PS8) is faulty.
The DC controller PCB is faulty.
E030
-->
The total copy counter has an open circuit.
The DC controller PCB is faulty.
E031
-->
The accessories counter has an open circuit.
The DC controller PCB is faulty.
(E202)
No code indication. Keys are disabled. (Note 2)
-->
The scanner home position sensor (PS1) is faulty.
The scanner motor (M2) is faulty.
The DC controller PCB is faulty.
E208
-->
The mirror home position sensor (PS3) is faulty.
The mirror motor (M4) is faulty.
The DC controller PCB is faulty.
E210
-->
The lens home position sensor (PS2) is faulty.
The lens motor (M3) is faulty.
The DC controller PCB is faulty.
E220
-->
The lamp regulator PCB is faulty.
The DC controller PCB is faulty.
E261
-->
The power supply frequency is faulty.
The power supply PCB is faulty.
E710
-->
The DC controller PCB is faulty.
E711
-->
The DC controller PCB is faulty.
E712
-->
The DC controller PCB is faulty.
The ADF controller PCB is fault.
The ADF cable is faulty.
E717
-->
The DC controller PCB is faulty.
The Remote Diagnostic Device II PCB is faulty.
E800
-->
The auto power-off circuit has an open circuit.
The DC controller PCB is faulty.
E805
-->
The exhaust fan (FM2, FM4) is faulty.
The DC controller PCB is faulty.
E821
-->
The ozone filter is clogged.
The cleaner thermistor (TH3) has poor contact or an open circuit.
The DC controller PCB is faulty.
ADF
-->
E400
-->
Exchange of data with the copier has a fault.
E401
-->
The separation motor does not rotate.
The crescent sensor is faulty.
E402
-->
The belt motor does not rotate.
The belt clock is faulty.
E403
-->
The feed motor does not rotate.
The feed motor clock is faulty.
E404
-->
The delivery motor does not rotate.
The delivery clock is faulty.
E411
-->
The sensor level is faulty.
E431
-->
The auto start separation motor does not rotate.
The auto start crescent sensor is faulty.
The auto start separation clock is faulty.
Sorter
-->
E500
-->
Exchange of data with the copier is faulty.
E510
-->
The feed motor does not rotate.
E511
-->
The feed motor rotates too slowly.
E513
-->
The tandem path motor does not rotate.
E520
-->
The stack motor does not rotate.
E530
-->
The alignment motor does not rotate.
E531
-->
The stapler drive motor does not rotate.
E540
-->
The shift motor does not rotate.
E541
-->
The shift motor rotates too slowly.
E550
-->
A timing jam has occurred.
Cassette Feeding Module
-->
E904
-->
The waste toner box swing cam home position sensor is faulty.
The cassette relay PCB is faulty.
Рекомендуем:
Коды ошибок OKIPAGE 10i
OKIPAGE 10i
-->
ERROR On
aaaaaaaa
-->
An error occurred in the controller.
n= Exception Code
aaaaaaaa= Error Address
Code (nn)
-->
Error
1~3
D~F
-->
Reserved
читать далее
При перепечатке материалов ссылка на RadX.ru обязательна
Copyright © RadX.ru
^наверх