Навигация
 

ГЛАВНАЯ

 

FAQ

 

СПРАВОЧНИК

 

ЭНЦИКЛОПЕДИЯ

 

XEROX




Материалы сайта
 

НОВОСТИ

 

ПУБЛИКАЦИИ

Локальный форум
 

2003

 

2004

 

2005

 

2006

 

2007



Главная страница --> Справочник

Коды ошибок OKIPAGE 10i

OKIPAGE 10i -->  

ERROR On
aaaaaaaa --> An error occurred in the controller.
n= Exception Code
aaaaaaaa= Error Address

Code (nn) --> Error

1~3
D~F --> Reserved

4 --> Address Error Exception(Load command, command fetch)

5 --> Address Error Exception(Store command)

6 --> Bus Error Exception(Command fetch)

7 --> Bus Error Exception(Load command, store command)

8 --> System Call Extension

9 --> Break Point Exception

A --> Reserved Instruction Exception

B --> Coprocessor Unusable Exception

C --> Arithmetic Overflow Exception

ERROR nn --> An error occurred in the controller.

Code (nn) --> Error

On --> A failure occurred in the controller.
n = Exception Code

10 --> An error was detected by program ROM check.

20 --> An error was detected by font ROM check.

30 --> An error was detected by resident RAM check.

40 --> An error was detected by EEPROM check.

50 --> An error was detected by optional software ROM check.

52 --> PS only can't happen.

53 --> PS only undefined sys call.

60 --> An error was detected by optional RAM check.

70 --> A failure occurred with the Fan motor.

71 --> A failure occurred with the fuser (timeout etc.).

72 --> A failure occurred with the fuser (thermistor error).

73 --> A failure occurred with the fuser (thermistor error).

74 --> SSIO Error

77 --> A toner sensor fault has occurred when
TOTAL DRAM COUNT is 30 or less.

80 --> I/F timeout occurred between the main control
board and the operator panel.

81 --> I/F timeout occurred between the main controlboard and the optional tray (High CapacitySecond Paper Feeder, Power Envelope Feeder,etc.).

90 --> A watchdog timer timeout occurred.

91 --> CPU Error

F0 --> Monitor error (double weight)

F1 --> Monitor error (argument error)

F2 --> Optional Timeout error

F3 --> Optional status error

F4 --> BG program error

F5 --> System timer program error.
Defect in the cable of the front feeder papersensor and the 2-pin connector on the maincontrol board.Poor connection of connectors.

F6 --> IPT2 program error

F7 --> IPT1 program error

HOST I/F
ERROR --> An error occurred in the serial I/F or network I/F.
This message is displayed when a parity error, a framingerror or an overrun error is detected. (When an erroroccurred in serial I/F)

COVER
OPEN --> The upper cover was opened.

COVER T2
OPEN --> The High Capacity Second Paper Feeder option coverwas opened.

tray
INPUTJAM tray : TRAY1, TRAY2, FEEDER, MANUAL

tray
FEED JAM --> A jam occurred during paper feeding after completion ofpaper hopping from the tray.
tray : TRAY1, TRAY2, FEEDER

tray
EXIT JAM --> A jam occurred during paper ejecting.
tray : TRAY1, TRAY2, FEEDER, MANUAL

tray
SIZE ERR --> Paper of improper size is being fed from the tray.
tray : TRAY1, TRAY2, FEEDER, MANUALtray
PAPEROUT --> The tray has run out of paper.
tray : TRAY1, TRAY2, FEEDER

tray
#REQUEST --> Loading of paper indicated by the first line message isrequested. The paper size may be one of the followings:
tray : TRAY1, TRAY2, FEEDER
Paper : LETTER, EXECUTIV, LEGAL 14, LEGAL 13, A4SIZE, A5 SIZE, A6 SIZE, B5 SIZE, COM-9, COM-10, MONARCH, DL ENV, C5 ENV

MANUAL
#REQUEST --> Manual loading of paper indicated by the first line messageis requested. The paper size one of the followings:
LETTER, EXECUTIV, LEGAL 14, LEGAL 13, A4 SIZE, A5SIZE, A6 SIZE, B5 SIZE, FREE SIZE, COM-10, MONARCH,DL ENV, C5 ENV

REC BUFF
OVERFLOW --> The receive buffer is overflowing.MEMORY
OVERFLOW --> The page buffer is overflowing because it received too muchdata for printing on the page.
Macro buffer is overflowing.The DLL buffer is overflowing

PRINT
OVERRUN --> The printer overrun because the print data is too complicatedto be printed.

OFF-LINE
emulate --> The printer is in the off-line mode. The second line indicatesthe emulation.
emulate : AUTO, PCL, PPR, FX, AdobePS, HEX

ACTIVE --> The printer is processing data.

WAITING
(PS Only) --> PostScript mode only. The printer is in the middle of a job and waiting for data to be processed.

PRINTING --> The printer is printing a page.

DATA
emulate --> The printer is processing data in the on-line mode.
Ready ON : The data that is not printed remains in thebuffer.
Ready flashing :The printer is receiving data or in printingprocess.
emulate : AUTO, PCL, PPR, FX, AdobePS, HEX

PRINT
FONTS --> All fonts of the printer are being printed during self-test.

PRINT
MENU --> The current menu setting is being printed.
Ready ON : Executed by command entry.
Ready flashing : Executed by key operation.

###### --> Message displayed when the power is turned on. When thepower is turned on, the LEDs are turned on for approximately 1 second, conducting a test to verify the conditions of theLEDs and LCD.

INITIALIZING --> Message displayed to indicate that the controller is undergoing an initialization when the power is turned on.
This message is displayed after the turning on of the LEDsas described above.

RESET
TO SAVE --> Message displayed to indicate that in order to reflect the changes inthe menu to the editing environment, RESET must be executed.This message is displayed when the printer is unable to conduct automatic reset due to the existence of temporary attributes such as DLL/Macro/User Pattern/User Symbol Set.

FMLOADING --> Indicates in Cold mode due to downloading to flash memory.

FM ERROR --> Indicates that an error occurs during downloading to flashmemory or deleting.

PRINT
DEMO --> The demo page is being printed.
Ready LED on : Executed by command entry.
Ready LED blinking : Executed by key operation.

nnn/mmm --> When the number of copies being printed is two or more, thenumber of copies being printed is displayed.This massage is displayed together with another messageon the first line.
nnn : Current page
mmm : Total page

PR BUSY
(PS Only) --> PostScript mode only.
This message is displayed when ON LINE key is pressed whilethe printer is processing a job, if the JOB RESET in menu is off.The printer goes off-line after completing the job.

PRINT
CLEANING --> This message is displayed when the printer is performingthe cleaning print.

CLEANING
MANUAL# --> Manual loading of paper indicated by the second line message is being reequested for cleaning. The paper size(#) may be one of the following:
# : LETTER REQUEST, A4 SIZE REQUEST

RESET
TO FLUSH
(PS Only) --> PostScript mode only.
This message is displayed when ON LINE key is pressed whilethe printer is processing a job, if the JOB RESET in menu is on.Even while this message is being displayed, the printercontinues to process the job normally.

FLUSHING
(PS Only) --> PostScript mode only.
This message is displayed during cancelling of a job.The message goes off when the job cancellation is completed.

RESET --> The data which remained unprinted in the buffer is deleted and the printer is initialized to user default settings.The temporary DLLs, macros and user pattern are deleted.

RESET
TO SAVE --> This message is displayed when the printer cannot resetautomatically to exit from the menu because there are dateand DLL's and macros having temporary attributes whenthe printer is changed from set mode to another mode.

TONERLOW --> Toner is running out.
This message is displayed together with another message on the first line.
Normal operation can be continued.

TONERSNS --> A fault occurred with the toner sensor.
This message is displayed together with another message onthe first line.
Normal operation can be continued.

TONEREMP --> Displays that the amount of toner is near empty (this status will appear after 100 sheets from a TONER LOW indication).
It is indicated by being combined with other messages in the first line.
Normal operation can be continued.

TONEREMP
CHG CART --> Displays that the amount of toner is near empty.
After 100 sheets from a TONER LOW indication, this status will appear and the printing be stopped.
If pressing ON-LINE SW, other 31 sheets can be printed and stopped. And from the next time on, the printing is stopped each sheet.

CHG DRUM --> This message is displayed together with another message on the first line.
Normal operation can be continued.

NO PS --> Unavailable printer language was designated by PJL command (warning).

PWR SAVE --> The printer is in the power-saving mode.
This message is displayed together with another message on the first line.

ERROR PS
AdobePS
(PS Only) --> PostScript mode only.
This message appears when the interpreter detects an error while a job is being processed. The remainder of the job is ignored.





Рекомендуем:

Коды ошибок OKIPAGE 12i

OKIPAGE 12i -->  

ERROR On
aaaaaaaa --> An error occurred in the controller.
n= Exception Code
aaaaaaaa= Error Address

Code (nn) --> Error

1~3
D~F --> Reserved читать далее





При перепечатке материалов ссылка на RadX.ru обязательна
Copyright © RadX.ru
^наверх
Яндекс.Метрика