U16 --> INSTALL DEVELOPER UNIT --> Developer unit is not installed
U17 --> — --> Sorter transport cover failure
U18 --> — --> Copy usage is upper limited.
oF --> SORTER FULL-EMPTY PRESS MODE KEY --> If too many copies in bin or too many bins selected. Remove copies and press the each sorter mode key on the touch panel.
--> Not ready (Red LED flashes) --> Power saving The ready indicator will light and the other displays are turned OFF. To clear the Stand-by mode, press the Print key.
--> Not ready (Red LED lights) --> Auto off The ready indicator will flash and the other displays are turned OFF. To clear the Power saving mode, press the Print key.
Paper Jam
Jam read codeCondition
J00The registration roller paper pass sensor does not detect paper within a predetermined time after sheet bypass paper feed roller starts rotating.
J01The copier upper paper feed unit paper pass sensor 1 does not detect paper within a predetermined time. When the duplex unit is not installed: After copier upper stage paper feed roller starts rotating. When the duplex unit is installed: After duplex unit paper feed roller starts rotating.
J02The copier lower paper feed unit paper pass sensor 2 does not detect paper within a predetermined time after copier lower stage paper feed roller starts rotating.
J03Optional system console upper paper feed unit paper pass sensor 1 does not detect paper within a predetermined time after upper stage paper feed roller starts rotating.
J04Optional system console middle paper feed unit paper pass sensor 2 does not detect paper within a predetermined time after middle stage paper feed roller starts rotating.
J05Optional system console lower paper feed unit paper pass sensor 3 does not detect paper within a predetermined time after lower stage paper feed roller starts rotating.
J06When optional LCC is installed. The copier lower stage paper pass sensor 2 does not detect paper within a predetermined time after LCC pick-up roller starts rotating.
J07Paper feeding from the copier lower paper tray or optional LCC or system console: The copier upper stage paper pass sensor 1 does not detect paper within a predetermined time after copier lower stage paper pass sensor detected paper.
J08Paper feeding from the optional system console upper stage: The copier lower stage paper pass sensor 2 does not detect paper within a predetermined time after optional system console upper stage paper pass sensor 1 detected paper.
J09a) Paper feeding from the optional system console middle stage: The copier lower stage paper pass sensor 2 does not detect paper within a predetermined time after optional system console middle stage paper pass sensor 2 detected paper. b) Paper feeding from the optional system console lower stage: The copier lower stage paper pass sensor 2 does not detect paper within a predetermined time after optional system console lower stage paper pass sensor 3 detected paper.
J10Not used
J11The copier upper stage paper pass sensor 1 is detecting paper within a predetermined time. a) Paper feeding from copier upper stage: b) Paper feeding from duplex unit.
J12Paper feeding from copier lower stage: The copier lower stage paper pass sensor 2 is detecting paper within a predetermined time after first detecting paper.
J13Paper feeding from optional system console upper stage: Upper stage paper pass sensor 1 is detecting paper within a predetermined time after first detecting paper.
J14Paper feeding from optional system console middle stage: Middle stage paper pass sensor 2 is detecting paper within a predetermined time after first detecting paper.
J15Paper feeding from optional system console lower stage: Lower stage paper pass sensor 3 is detecting paper within a predetermined time after first detecting paper.
J16Paper feeding from optional LCC: The copier lower stage paper pass sensor 2 is detecting paper within a predetermined time after first detecting paper.
J17When fixed quantity paper passed on the registration roller paper pass sensor. a) The copier paper pass sensor 1 or 2 is detecting paper. b) Optional paper pass sensor 1 or 2 or 3 is detecting paper.
J18Paper feeding except from sheet bypass: The registration roller paper pass sensor does not detect paper within a predetermined time after copier upper stage paper pass sensor 1 detected paper.
J19-20Not used
J21Copier upper stage paper pass sensor 1 is detecting paper.
J22Copier lower stage paper pass sensor 2 is detecting paper.
J23Optional system console upper paper pass sensor 1 is detecting paper.
J24Optional system console middle paper pass sensor 2 is detecting paper.
J25Optional system console lower paper pass sensor 3 is detecting paper.
J26-29Not used
J30Paper feeding from sheet bypass: The registration roller paper pass sensor is detecting paper within a predetermined time after sensor detected paper.
J31Paper feeding except from sheet bypass: The registration roller paper pass sensor is detecting paper within a predetermined time after registration roller starts rotating.
J32Not used
J33The registration roller paper pass sensor is detecting paper.
J34-39Not used
J40The paper exit sensor does not detect paper within a predetermined time after registration roller starts rotating.
J41The paper exit sensor is detecting paper within a predetermined time after sensor detected paper.
J42The paper exit sensor is detecting paper.
J43-49Not used
J50Transport operation for duplexing The duplex unit paper pass sensor 1 does not detect paper within a predetermined time after copier paper exit sensor detected paper.
J51Transport operation for duplexing The duplex unit paper pass sensor 1 is detecting paper within a predetermined time after sensor detected paper.
J52Transport operation for duplexing The duplex unit paper pass sensor 2 does not detect paper within a predetermined time after paper pass sensor 1 detected paper.
J53Transport operation for duplexing The duplex unit paper pass sensor 2 is detecting paper within a predetermined time after sensor detected paper.
J54The duplex unit paper pass sensor 1 is detecting paper.
J55The duplex unit paper pass sensor 2 is detecting paper.
J56The duplex unit paper detecting sensor does not detect paper after copies are fed into the duplex unit tray.
J57-59Not used
J60When the sorter is installed. a) The sorter entry paper pass sensor does not detect paper within a predetermined time after copier paper exit sensor detected paper. b) The sorter paper exit sensor does not detected paper within a predetermined time after sorter entry paper pass sensor detected paper. c) The sorter entry or exit paper pass sensor is detecting paper. d) For FA-S575 The sorter exit paper pass sensor does not detect paperwithin a predetermined time after sorter entry paper pass sensor detected paper. e) For FA-S575 The sorter exit paper pass sensor is detecting within a predetermined time after sensor detected paper.
J70When ADF is installed. a) The ADF entry paper pass sensor does not detect paper within a predetermined time after ADF paper feed roller starts rotating. b) The ADF entry paper pass sensor is detecting paper within a predetermined time after sensor detected paper. c) The ADF entry paper pass sensor is detecting paper before using ADF.
J71a) The ADF exit paper pass sensor does not detect paper within a predetermined time after ADF starts paper exit. b) The ADF exit paper pass sensor is detecting paper within a predetermined time after sensor detected paper. c) The ADF exit paper pass sensor is detecting paper before using ADF.
J72(FA-A888) a) The ADF exit paper pass sensor does not detect paper within a predetermined time after ADF starts reverse operation. b) The ADF exit paper pass sensor is detecting paper within a predetermined time after sensor detected paper.
E1: Optical unit error
CodeFunction
E1-01Optical unit scan operating
E1-20Lens ratio operating
E1-21Mirror ratio operating
E1-23F8-02 mis-input
E1-32Auto original density detection
E1-40Optics fan motor (1) rotation
E1-41Optics fan motor (2) rotation
E1-43Optics fan motor (4) rotation
E2: Paper feed unit error
CodeFunction
E2-01Lift motor rotation 1 (Copier upper tray)
E2-02Lift motor rotation 2 (Copier lower tray)
E2-03Lift motor rotation 3 (System console upper)
E2-04Lift motor rotation 4 (system console middle)
E2-05Lift motor rotation 5 (system console lower)
E2-06Optional LCC lift operation (UP)
E2-07Optional LCC lift operation (DOWN)
E2-10System console motor rotation manual
E3: Developer unit and Hopper unit error
CodeFunction
E3-01Toner bottle motor rotation
E3-03Toner density sensor gain
E3-10High voltage power supply leak (1)
E3-11High voltage power supply leak (2)
E3-20Main motor rotation
E3-21Dust collection fan motor rotation
E3-22Exhaust fan motor rotation
E3-23Suction fan motor rotation
E3-30Discharge lamp
E3-40Copy density sensor output detection
E3-50Transfer cleaner operation
E4: Fuser unit error
CodeFunction
E4-01Fuser warm-up
E4-10Exhaust fan motor (1) rotation
E4-11Exhaust fan motor (2) rotation
E4-12Exhaust fan motor (3) rotation
E5: System (+24V/+10V) error
CodeFunction
E5-01Vp (+24V) line
E5-04Vo (+10V) line
E5-10+5V (for EPA)
E5-21ADF communication abnormal
E5-22Sorter communication abnormal
E5-23Control panel communication abnormal
E5-41Registration timing control circuit abnormal
E5-42Total counter connection
E5-50Communication error
E6: Duplex unit error
CodeFunction
E6-03Paper length home position detecting sensor
E6-04Paper width home position detecting sensor
E6-05Paper detecting sensor
E7: Optional unit error *These errors are indicated when options are installed.
CodeFunction
E7-01Sorter bin movement
E7-03Transport belt motor failure
E7-06Stapler drive motor failure
E7-07Tamper drive motor failure
E7-10ADF main motor rotation
E7-11ADF sensors output abnormal (registration and original exit/reverse sensor)
Рекомендуем:
Коды ошибок Z-20 / 23 / 25
Z-20/23/25 -->
Z-20 --> Z-23/25 --> Неисправность
Мигают все индикаторы, кроме индикатора ГОТОВ --> L3 --> После начала вращения двигателя сигнал датчика полож читать далее
