root Saratov Помогите плиз! Никакой инфы по этому цветнику не смог пока найти.root Ternopol Eто Gestetner C7116DNroot Ternopol Defective fusing belt, gear, or rotation plate • Defective connection between engine control board (CN15) and fusing unit • Defective connection of fusing unit connector • Pin 4 (CN15) unable to send 1.4-second (or less) encoder pulse 1. Replace the fusing unit. 2. Connect the cable between the engine control board (CN15) and fusing unit correctly. 3. Connect the fusing unit connector correctly. 4. Replace the engine control board. root Ternopol The rotation of the fusing unit is not normal. root Saratov Спасибо! Разобрал печку, какой-то "кулибин" перевернул вал с датчиком вращения. Поставил на место- ошибка исчезла.
root Челябинск При полном обороте фотобарабана на лист выводится размытая полоса (при использовании другого картриджа чёрная полоса), менял механнику у апарата всё стало нормально прогнал копий 30... сегодня принесли снова с той же проблемой... Что с этим можно ещё сд читать далее